There are five reasons for failing good quantitative status and are summarised in the Table 6.1 below.
About 40% of the RBDs (43% = 57 of 135 reported RBDs), where information is available are failing good quantitative status of groundwater bodies.
The main reason for failing good quantitative status is the exceedance of the available groundwater resource by the long-term annual average rate of abstraction that may result in a decrease of groundwater levels.
Table 6.1 - Reasons for failing good quantitative status (number of RBDs concerned)
RBD |
Reasons for failing good groundwater quantitative status |
49 |
a) Exceedance of available groundwater resource by long-term annual average rate of abstraction that may result in a decrease of groundwater levels |
18 |
b) Failure to achieve environmental objectives (Article 4 WFD) for associated surface waters; |
23 |
c) Significant diminution of the status of surface waters; |
9 |
d) Significant damage to terrestrial ecosystems directly depending on groundwater; |
14 |
e) Saline or other intrusion |
57 |
Total number of RBDs where poor status is evident and reasons were reported |
135 |
Total number of RBDs where data were uploaded to WISE |
You cannot post comments to this consultation because you are not authenticated. Please log in.